Anode Paste Preparation
From pitch and dry material dosing systems to paste mixing and cooling, Fives offers tailor-made solutions for paste quality optimization.
The Fives added value is based on a perfect knowledge of the process and available technologies, the development of specific proprietary equipment and the integration of its own advanced control software.
Safety and easy operation
Thanks to a well-designed layout, the access for maintenance of process equipment is easy and safe. Reduced noise, controlled emissions and insulation of hot surfaces contribute to a safe working area. Through the perfect knowledge of available technologies and the meticulous design of the proprietary equipment and advanced control systems, Fives’ solutions are optimized to meet Customer’s needs and requirements in terms of operation and maintenance.
The Intensive Mixing Cascade (IMC®), a cost effective solution for better paste homogeneity
- A continuous intensive pan mixer fitted with one or several rotor(s), with fixed or variable speed drives, standard or specific tools, etc...
- A proprietary dry mix preheating screw fitted with a variable speed drive (to maximize continuously the heat exchange rate according to the throughput rate) and a proprietary designed HTM heating loop for a very accurate outlet temperature control of the dry mix
- A continuous intensive pan remixer-cooler fitted with the same optional features, plus water spraying devices in the inlet duct
The conventional kneading solution
This solution includes the same pieces of equipment than for the IMC®, except the continuous paste kneader that is used as a mixer instead of the intensive pan mixer.
A long experience in all available technologies
Fives has developed many technologies for the anode paste preparation. From the first anode paste kneaders in the 1950’s, the first continuous anode paste cooler in 1990, to the first Intensive Mixing Cascade in 2002, Fives has acquired a unique expertise for such processes. Specialists of the Fives Aluminium speciality are able to evaluate customer’s expectations and to propose accordingly the best suitable solution among the two benchmarking alternatives available on the market.
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here