In order to comply with the requirements of new smelters built in warm countries or the upgrade of existing facilities, Fives' GTCs can feature a range of gas cooling solutions in addition to natural convection.
When temperatures reach 170 to 200°C at pot outlets (depending on pots amperage and ambient temperature), gases must be cooled down to secure the equipment (gaskets, gates, filtering fabrics) and to maintain a high HF adsorption efficiency by alumina.
Up to now, in every modern GTC, Fives includes air dilution technologies, which consist in mixing hot gases with a controlled volume of ambient air using modulating dampers to obtain the required gas cooling. However, if needed, Fives can also offer three other technologies to reach higher cooling levels. Any of these technologies can be coupled together to reach an optimal temperature reduction.
In partnership with Hydro and NTNU (Norwegian University of Science and Technology), Fives has developed and implemented very efficient heat exchangers with low fouling. In Fives’ heat exchanger, fumes circulate perpendicularly to the tube axle while cooling liquid circulates inside finned tubes.
A sustainable solution with high heat recovery potentials, which offers:
- High gas temperature drop (up to 50°C) without increasing the flowrate
- High compactedness solutions
- Low fouling
In a water injection system, water spraying is performed inside large-diameter ducts upstream of the GTC. In order to reach a good evaporation performance, water is sprayed in low-diameter droplets (< 100µm), using compressed air.
Fives has developed the expertise to integrate this gas cooling technology and the know-how to ensure that atomized water droplets do not come in contact with the inside walls of the ductwork, which would lead to corrosion or scaling.
A easy solution for existing plants, which includes:
- A significant temperature decrease
- An integrated anti-corrosion design
The temperature decrease is provided by hairpin-shaped ducts which artificially increase the distance covered by gases in ducts, enabling longer exchanges between ambient air and gases. This technique leads to an additional 5-10°C temperature drop.
A cost effective solution for new installations, which features:
- A natural increase convection between ambient air and gases
- An easy implementation
- A moderate temperature drop
⇒ For recruitment-related matters (application, etc.), please do not use this form. Make your requests on this page.
In order to address your request, we need to collect the information listed in the form below
Information on data processing
As a data processor, FIVES implements personal data processing when managing your contact request. The data collected are required for this processing and are retained, unless you object, for a period of 6 months from the last contact between you and FIVES. If the information is incomplete, FIVES will not be able to respond to your contact.
The data collected are exclusively for the use of FIVES departments.
Pursuant to current legislation, you have the right to request access to data concerning you, their correction, deletion and portability, as well as a right of limitation over processing of your data.
These rights can be exercised by email to DPO@fivesgroup.com or by post to the Data Protection Officer at the following address: FIVES, 3 Rue Drouot, 75009 Paris, accompanied by a copy of an identity document.
In case of a dispute involving processing of your personal data, you have the right to make a complaint to the French Data Protection Agency (CNIL).
To find out more about our personal data protection policy click here